Ø230 mm Magnetic Particle Testing Device (MPI)
KDV: Fiyatlara %20 KDV dahildir
Minimum Sipariş: 1 Adet ve Üzeri Sepete Ekle
- Stock: Sadece Teklif
- Model: MGK-MAN-1
- Category: Manyetik Partikül Test Cihazları
| Stock | : | Sadece Teklif |
| Model | : | MGK-MAN-1 |
| Category | : | Manyetik Partikül Test Cihazları |
Ø230 mm Magnetic Particle Testing Device (MPI)
Ø230 mm Magnetic Particle Testing Device (MPI)
MPI Test Machine with Ø230 Inlet and Outlet – Magnetic Particle Inspection Equipment
Gaps, errors, cracks, folds, welding errors, residual inclusions and cavity errors found on the material surface are detected with the help of the MPI Test Machine with a diameter of 230 mm. It is used for detecting defects found in aerospace parts, high temperature casting alloys, crankshaft alloys, landing gear materials and on the surface of materials produced in the defense industry.
Ø230 MPI A magnetic field is formed on the material surface as a result of direct current applied to the material passing through the tester. If there is a specific crack within the material, N and S poles form at the start and end regions of this crack. These formed polar lines are oriented by interacting with surface-deposited dust particles under the magnetic field. In this way, the detection of invisible dust particles is achieved. The magnetic particle flaw detection device is applicable to all ferromagnetic materials with magnetic permeability above 100. Since 300-grade austenitic steels have very low magnetic susceptibility, they do not respond to the MPI testing device. You can examine our products as domestically produced at our facilities located in Pendik, Istanbul. For your larger needs, you can opt for the larger-scale Magnetic Particle Inspection Equipment device we mentioned above.
MPI Crack Test Application Steps
You can follow the following steps to perform crack testing on MPI testing machines. With this device that performs magnetization, you can detect cracks. Pre-cleaning of the part surface First Demagnetization Application of magnetism Spraying of ferromagnetic powders Termination of magnetism Observation Evaluation and report preparation Final Demagnetization and cleaning Magnetic Particle Crack Tester is the product of Magneteksan© Company. Our company, which has a domestic and national production capability, is a manufacturer of magnetic equipment imported from abroad. Similar Products