4 PCS Magnetic License Plate Mount Set with Strong Neodymium Magnets – 2 Thick for Bumper 2 Thin for Plate Back

Magnetic License Plate – Customer Videos

Each order includes 4 magnets in total.
2 thin magnets are installed behind the license plate, and 2 thick magnets are placed behind the bumper.

By watching the videos below, you can learn more about the product and see the magnetic license plate installation process in detail.

If you have any questions, you can contact our WhatsApp support line for assistance.

Magnetic License Plate Set – Heat and Cold Resistant

Our magnetic license plate set includes 2 thick magnets for behind the bumper and 2 thin magnets for behind the license plate, allowing the plate to stay secure without sticking out too much.
All magnets are first-class nickel coated, resistant to corrosion, and designed to withstand both hot and cold weather conditions.
The magnets are made of N35 grade neodymium, providing very strong holding force.

For installation information and sample videos, you can contact us via WhatsApp support.

---

Holding Force Information

A single thick neodymium magnet can hold metal with a force of up to 50 kg under ideal conditions.
When two magnets are attached directly to each other, the holding force increases to more than double.
However, when a car bumper is between the magnets, the holding force decreases depending on bumper thickness.

For this reason, we recommend following the speed and quantity guidelines below.

---

Speed Recommendation – How Many Sets Should I Buy?

The speeds below are calculated according to strong wind and worst-case driving conditions.

• For speeds between 0 – 160 km/h → 4 magnets (1 set) is sufficient

• For speeds between 160 – 260 km/h → 8 magnets (2 sets) recommended

• For speeds above 260 km/h → at least 3 sets recommended

When installed correctly, the magnetic plate system can securely hold the license plate even at high speed.

---

Important Notes for Correct Installation

To achieve maximum holding force:

• 5 mm thick magnets should be installed behind the license plate

• 10 mm thick magnets should be installed behind the bumper

• Opposite poles attract, same poles repel — check magnet direction before installation

• Front and rear magnets must be aligned exactly opposite each other

• First glue the magnets to the plate and wait until fully fixed

• Then place the plate on the bumper and position the rear magnets from inside

• After perfect alignment, fix the rear magnets in place

⚠ Because these magnets are very strong, they may break if they hit each other hard.
Handle carefully and do not let them snap together.

---

Technical Specifications

• Diameter: Standard

• Thickness: Standard

• Tolerance: ± 0.1 mm

• Magnet Type: Neodymium

• Grade: N35

• Coating: Nickel (Ni)

• Max Working Temperature: 80 °C

• Holding Force: approx. 40 – 80 kg (depending on surface and distance)