PML-100 Magnetic Lever Hoist - 100 kg Power

PML-100 Magnetic Leverage 100 KG

The PML-100 magnetic lever is used for lifting metal sheets and attached to cranes or similar devices to move heavy metal materials. This magnetic lever, known as PML-100 or PML-1, is very effective in areas where manpower is not enough and has a carrying power of 100 kg.

Usage:

• Power: 100 kg carrying capacity, no extra power or electricity required.
  
• Activation: The magnetic power is activated with the help of the lever on it. The device is off when the lever is not pulled.
• Steps:
• Before use, clean the surface of the part to be pulled.
• Place the magnetic lever on the center of gravity of the part.
• Lower the magnetic lever onto the part, pull the lever and activate the device.
• After the magnetic force holds your part, lift and move the metal with the help of a crane etc.
• When the part is in the desired position, turn the lever off again.

Power Efficiency:

Magnetic levers offer different power efficiency according to the thickness of the metal it will pull. You can check how much power the PML model offers for which material thickness.

This magnetic lever offers an effective solution when manpower is not enough and provides permanent power with a lever system that does not require electricity.

Magnetic levers offer different power ratings depending on the quality and type of metal they are pulling. They offer full efficiency when pulling low carbon steel and the lowest pulling power in cast iron.