PML-2000 Magnetic Hoist - 2000 kg Power

2000 kg (2 Ton) Magnetic Lever Hoist - PML 2000

The PML-2000 lever arm magnetic lever for lifting metal sheets is designed to carry heavy metal materials by attaching to cranes or similar devices. This magnetic lever, also known as PML-2000 or PML-20 in some sources, has a carrying capacity of 2000 kg and is very effective in areas where manpower is not enough.

How to Use 2 Ton Magnetic Leverage?

The PML-20 or PML-2000 arm magnetic lever does not need an extra power source. This lever system, which does not require electricity, provides continuous magnetic power. Magnetic power is activated with the help of the lever on it. When the lever is not pulled, the device remains in the off position and does not provide any power.

Usage Steps:

Before using the device, clean the surface of the part to be lifted.

Place the magnetic lever at the center of gravity of the part.

Lower the magnetic lever onto the part and activate the device by pulling the lever.

Once the magnetic force holds the part, lift and move the metal with the help of a crane or similar device.

Once the part is in the desired position, turn the lever off again.

Power Efficiency of Magnetic Levers According to Material Thickness

Our magnetic lever hoists offer varying power depending on the thickness of the metal to be pulled. You can check below how much power your PML model offers for which material thickness. This is important to maximize the efficiency of the lifter.

Specifications:

• Model: PML-2000 or PML-20
  
• Carrying Capacity: 2000 kg (2 tons)
• Working Principle: Lever magnetic system, no electricity required
• Durability Safely handling heavy metal materials

This magnetic lever hoist is the ideal solution for the safe and efficient handling of heavy metal loads.

Power Efficiency of Magnetic Levers According to Material Quality

Magnetic levers offer different power ratings depending on the quality and type of metal to be pulled. Full efficiency is achieved when pulling low carbon steel, while the lowest pulling power is on cast iron.