Menu
Your Cart

PML-5000 Magnetic Hoist - 5000 kg Power

PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
PML-5000 Magnetic Hoist - 5000 kg Power
Share:
PML-5000 Magnetic Hoist - 5000 kg Power
89,499.00 TL

With installments starting from 6,215.21 TL!

Stock : In Stock
Model : MGK-PML-5000
Category : Magnetic Lifters
Add to Cart
3 days in delivery!
Delivery by 27 July 2024 Saturday at the latest.

PML-5000 Magnetic Lever Hoist - 5 Ton Power (Max Breaking Force 12500 kg)

Magnetic levers enable the transportation of very heavy metal parts or sheets with the help of a crane. The PML-5000 model, which is used in areas where manpower is not enough, can carry a total weight of 5000 kg. The maximum breaking force is 12500 kg. This powerful magnetic lever must be attached to cranes or similar devices due to its high weight.

Instructions for Use:

  • Clean the Surface: Before using the device, clean the surface of the part to be lifted.
  • Center of Gravity: Bring the magnetic lifter to the center of gravity of your part.
  • Activate the Device: Lower the magnetic lifter onto the part to be lifted. Activate the magnetic power with the help of the lever.
  • Lifting and Transportation: After the magnetic force holds your part, lift and move the metal with the help of the crane.
  • Adjust Position: When your part is in the desired position, turn the lever off again.

Technical Specifications:

  • Carrying Force: 5000 kg
  • Maximum Breaking Strength: 12500 kg
  • No Electricity Required: The lever lever system offers a permanent power, no extra power is required.
  • Activation with Lever: Magnetic power is activated with the help of the lever on it. The device is off when the lever is not pulled.
 Power Efficiency of Magnetic Levers According to Material Thickness:

Our magnetic lever hoists offer power according to the thickness of the metal it will pull against. You can check below how much power the PML model you will buy offers in which material thickness.

This magnetic lever hoist provides safe and efficient transportation of large and heavy metal parts. With permanent magnetic power that does not require electricity, it can be used in a variety of industrial applications.

 

Magnetic levers offer different power ratings depending on the quality and type of metal to be drawn. It offers full efficiency when pulling low carbon steel and gives the lowest pulling power in cast iron.

Material
Productivity
Low carbon steel
100%
Medium carbon steel
90%
High carbon steel
80%
High alloy steel
70%
Cast iron
50%

 
magnetic lever dimensions 
 
Stock No Power (Flat)
Power (Oval)
Max.Watt W L H I °C
MGK-PML-100 100 50 350 62 92 67 126 <80
MGK-PML-300 300 150 1050 92 162 91 155 <80
MGK-PML-600 600 300 2100 122 232 117 196 <80
MGK-PML-1000 1000 500 3500 176 258 163 285 <80
MGK-PML-2000 2000 1000 7000 234 378 212 426 <80
MGK-PML-3000 3000 1500 10500 286 458 261 521 <80
MGK-PML-5000 5000 1800 18000 296 720 266 700 <80
 
 
 
Technical Details

Length: 720 mm
Width 296 mm
Height 266 mm
Arm Length 700 mm
Magnet Type: Neodymium
Carrying Capacity: 5000 kg
Breaking Strength 12500 kg
Product Weight: 200-300 kg
Maximum Operating Temperature: 80°C
IMPORTANT NOTE: Our company repairs and maintains magnetic lifting equipment. If you purchase our products from us, you can benefit from a 50% discount on maintenance and repair fees.






WhatsApp Support